BioStim M7 – Digital TENS Unit

BioStim M7 – Digital TENS Unit

BioStim® M7 TENS Device has seven programmable functions; Continuous, Width Modulation, Rate Modulation, Rate and Width Modulation, SD1, SD2 and Cycled Burst. The device has a Patient Lock System that, when activated prevents the patient from changing any of the set parameters. When the Patient Lock Systems is turned off, a Patient Compliance Meter is displayed showing how long the device was used. A timer allows the patient to use the device for a specified period of time. The two-channel device incorporates touch proof design and is run by two AA Batteries. Device comes with lead wires, electrodes (4), batteries, instruction booklet and carrying case.

Specifications:

• Size: 3.25” x 2.25” x 1 5/8” (82 mm x 70mm x 45mm)
• Weight: 8 oz (266 grams)
• Channels: Dual
• Waveform: Asymmetrical rectangular biphasic (TENS)
• Pulse Rate (adj.): 1- 200 Hz
• Pulse Width (adj.): 10 - 250 µs

Stimulation Modes:

• Continuous: Constant Stimulation
• Rate Modulation: 50% decrease/increase of set value over a 5 second cycle
• Width Modulation: 50% decrease/increase of set value over a 5 second cycle
• Rate/Width Modulation: 50% decrease in set value over a five second period. As rate increases, width decreases.
• SD1: Increase of set pulse width 40%, decrease of set pulse rate 45% and decrease of amplitude 10% over a 3 second period.
Values return to original settings over the next 3 seconds.
• SD2: Increase of set pulse width 60%, decrease of set pulse rate 90% and decrease of amplitude 13% over a 6 second period.
Values return to original settings over the next 6 seconds.
• Cycled Burst: 2.5 seconds on. 2.5 seconds off. Adjustable Rate and Width.
• Output Voltage: 49 Volts peak to peak
• Intensity (adj.): 0-98 mA
• Power Supply: 2 AA Batteries
• Timer: Constant, 15, 30 or 60 minutes